Ambient Light Sensor Programmer

Ambient Light Sensor Programmer for iPhone 8/8 Plus/X LCD screen 3 in 1 ALS / Ambient Light Sensor Programmer for iPhone 8/8 Plus/X - RP100 Features: This programmer is used to solve ambient light sensor not working issue after screen replacement. To solve the auto-brightness issue by reading the firmware data of the original screen, and write the information into the replacement screen. Please note: This item can only be used for original screens, aftermarket screens are under developing. Description: - LCD screen EEPROM photosensitive data programmer for iPhone 8/8p/X to solve auto-brightness issue. - Read original LCD screen ASL data on iPhone 8/8P/X. - Backup the original photosensitive data to the computer, avoid to lost it. - Write the original photosensitive data on the replacement LCD Screen. - For iPhone 8/8 Plus/X series, the Ambient Light Sensor stops working after screen replacement even with original one. Specification: - Cable Length: 95cm / 37.40inch - Step for Usage: - 1.You need to prepare an Android cable,it on.The screen lights up automatically when the power is on.So let's do that. - 2.Click on the first icon,let's go to the next screen. - 3.The original screen is on the left,the assembly screen is on the right. - 4.Once the aseeebly and original screen are in place,click read,can read and write,after successful reading,click on the right to write!After you have written,the photosensitive repair of the assembly screen was successful!