Transcend 960gb Sataiii Jetdrive 420 Int

Product Description Transcend 960GB SataIII JetDrive 420 Internal SSD Guaranteed Compatibility & Reliability Transcend’s JetDrive 420 has been fully tested for 100% compatibility with MacBook Pro unibody Late 2008 ~ Mid 2012 & Mac mini unibody Mid 2010 ~ Late 2012 models. To assure robust, long-life durability and guaranteed performance, all Transcend SSDs are manufactured using only premium quality NAND Flash memory chips and are comprehensively tested for compatibility, speed and reliability. Features Compatible with MacBook, MacBook Pro, and Mac Mini (Late 2008 – Mid 2012) Available in 120GB, 240GB, 480GB, and 960GB capacities Free download of JetDrive Toolbox SSD monitoring software External enclosure is fully compatible with SuperSpeed USB 3.0 & Hi-Speed USB 2.0 Transcend JetDrive 420 SATA III SSD Upgrade Kit for MacBook TS960GJDM420 Transcend’s JetDrive 420 SATA III 6Gb/s SSD for MacBook Pro and Mac mini is ideal for professional photographers, videographers, and graphic artists looking to enhance the performance and capacity of their Mac system, and includes an easy-to-use drive enclosure for converting your original SSD into a new USB 3.0 external storage device. **If your device is not listed in the table below, there currently isn’t a compatible JetDrive for your device What’s in the package? JetDrive 420 MacBook Pro/Mac mini SSD External USB 3.0 Aluminum Housing USB 3.0 Cable Travel Pouch Quick Installation Guide Warranty Card Faster Performance and More Storage Space Transcend’s JetDrive 420 features the next-generation SATA III 6Gb/s interface to deliver lightning-fast transfer speeds of up to 570MB/s read and 470MB/s write. No matter whether you’re a casual Mac user or are fond of more serious activities such as graphic design, video editing, and gaming, upgrading to the JetDrive 420 gives you faster system response and application launch times. Available in 120GB, 240GB, 480GB, and 960GB capacities, the JetDrive 420 is large enough to handle data-intensive applications and store all your files. SSD Upgrade Kit – Easy to Install The JetDrive 420 comes with a handy SSD upgrade kit that makes upgrading your MacBook Pro or Mac mini easier than ever. It takes just 6 easy steps found on the Quick Installation Guide provided in the package to upgrade to your new Transcend JetDrive SSD complete with Mac operating system and all the data you wish to transfer. *Please refer to the Transcend website for an in depth installation guide. *Please refer to the Support and Download section of the Transcend website for FAQs. Retask Your Original SSD – Sleek USB 3.0 External Enclosure The JetDrive 420 SSD comes bundled with an elegant USB 3.0 external drive enclosure aesthetically designed to look like a natural extension of your MacBook Pro and Mac mini system. In just a few simple steps, you can reuse your original SSD as a sleek new USB 3.0 external storage device to store and backup your documents, photos, music, and movies. The enclosure is made of durable aluminum. The result is a design that’s sturdy yet ultra light and easy to carry, and includes a handy travel pouch to protect the drive against scratches during transport. A bright LED indicator flashes during data transfer activity, and no external power or battery is required for operation. Take Control with JetDrive Toolbox Transcend JetDrive Toolbox brings together the latest technology for determining the condition and optimizing performance of your JetDrive SSD into a single user-friendly tool. JetDrive Toolbox analyzes the health status of your Transcend SSD with S.M.A.R.T. technology. Additionally, the Health Indicator function can monitor the wear-out level of your SSDs. Read more TRIM Support With TRIM command enabled, the SSD controller will inform the flash to delete the data immediately when the SSD is idling. △:Apple does not allow 3rd party SSD to enable TRIM. Transcend SSD utilizes the garbage collection algorithm to help manage data and maintain peak performance even if the OS does not support TRIM function. ＊: To enable TRIM, run the command ‘sudo trimforce enable’ from the OS X terminal, and enter admin-level password to activate Trim support in SSD. The system will ask twice to confirm if the command is executed. After users confirm twice, the system will automatically reboot in order to implement the new support. To check TRIM support status: Click ‘About This Mac’=> ‘System Report’=> ‘SATA/SATA Express’ Legal Disclaimers (1) Storage capacity approximations are for general reference only. Actual results will vary depending on resolution, compression quality, video frame rate/interlace settings, and content. 1GB = 1 billion bytes. A certain portion of the storage capacity may be reserved for firmware and maintenance use. (2) The warranty does not apply to the SSD product whose wear-out indicator reading detected by Transcend JetDrive Toolbox shows 0% (normally 100% when being brand new). (3) Performance varies by capacity, user hardware and system configuration. Please see Transcend website for additional warranty details and limitations. Apple, MacBook Pro, MacBook Air, and Retina are trademarks of Apple Inc. JetDrive 420 JetDrive 500 JetDrive 520 JetDrive 720 JetDrive 725 Compatibility MacBook Pro MacBook Unibody (Late 2008 ~ Mid 2012) Mac mini Unibody (Mid 2010 ~ Late 2012) MacBook Air (Late 2010 & Mid 2011) *11” MacBook Air Late 2010 is incompatible with 480GB/960GB JDM500 ** MacBook Air Late 2010 model only supports SATA II 3Gb/s. MacBook Air Mid 2012 13” MacBook Pro (Late 2012, Early 2013 with Retina display) 15” MacBook Pro (Mid 2012, Early 2013 with Retina display) Capacities 120GB, 240GB, 480GB, 960GB 240GB, 480GB, 960GB 240GB, 480GB, 960GB 240GB, 480GB, 960GB 240GB, 480GB, 960GB SSD Interface SATA III 6Gb/s (backwards compatible with SATA I & II) SATA III 6Gb/s (backwards compatible with SATA I & II) SATA III 6Gb/s (backwards compatible with SATA I & II) SATA III 6Gb/s (backwards compatible with SATA I & II) SATA III 6Gb/s (backwards compatible with SATA I & II) Enclosure Interface USB 3.0 (backwards compatible with USB 2.0) USB 3.0 (backwards compatible with USB 2.0) USB 3.0 (backwards compatible with USB 2.0) USB 3.0 (backwards compatible with USB 2.0) USB 3.0 (backwards compatible with USB 2.0) Enclosure Dimensions & Weight 129x80x13 mm (5.08×3.15×0.51 in.) 130×28.2×10.8 mm (5.12×1.11×0.43 in.) 130×28.2×10.8 mm (5.12×1.11×0.43 in.) 110.9×37.2×10.8 mm (4.37×1.46×0.43 in.) 110.9×37.2×10.8 mm (4.37×1.46×0.43 in.) Weight 86g (3.03 oz) 60g (2.12oz) 60g (2.12oz) 65g (2.29oz) 65g (2.29oz)