Super Micro Dual Xeon Server Mb X9drd-ef

Product SKUs MBD-X9DRD-EF -O X9DRD-EF (Standard Retail Pack) MBD-X9DRD-EF -B X9DRD-EF (Bulk Pack) Physical Stats Form Factor E-ATX Dimensions 12″ x 13″ (30.5cm x 33.0cm) Processor/Cache CPU Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP **) Note † BIOS version 3.0 or above is required Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support. Cache Up to 30MB System Bus QPI up to 8 GT/s System Memory Memory Capacity 16x 240-pin DDR3 DIMM sockets Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC RDIMM Up to 128GB DDR3 ECC/non-ECC UDIMM Memory Type 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM Memory Voltage 1.5 V, 1.35 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices Chipset Intel® C602J chipset SATA SATA 2.0 3Gb/s with RAID 0, 1, 5, 10 SATA 3.0 6Gb/s with RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC Network Controllers Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201F PHY (dedicated IPMI) Video Matrox G200eW Input / Output SATA 2 SATA 3.0 ports (6Gb/s) 4 SATA 2.0 ports (3Gb/s) LAN 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port USB 9 USB 2.0 ports total (4 rear + 4 via header + 1 Type A) Video 1 VGA port Serial Port / Header 2 Fast UART 16550 ports (rear/header) DOM 1 DOM (Disk on Module) power connector TPM 1 TPM 1.2 20-pin Header Chassis (Optimized for X9DRD-EF ) 1U Chassis CSE-815TQ-600CB 2U Chassis CSE-825TQ-R740LPB CSE-826BA-R1K28LPB CSE-826BA-R920LPB CSE-826BE16-R1K28LPB CSE-826BE16-R920LPB CSE-826BE26-R1K28LPB CSE-826BE26-R920LPB 3U Chassis CSE-835TQ-R920B Tower / 4U Rackmount CSE-846BA-R1K28B CSE-846BE16-R1K28B CSE-846BE26-R1K28B CSE-847A-R1400B CSE-847A-R1K28LPB CSE-847E16-R1400B CSE-847E16-R1K28LPB CSE-847E26-R1400B CSE-847E26-R1K28LPB Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. Please use optional I/O shield MCP-260-00041-0N in Supermicro 1U chassis SuperServer(s) with X9DRD-EF Model(s) SYS-6017R-TDF+ SSG-6027R-E1CR12L SSG-2027R-E1CR24L SSG-6047R-E1CR36L Expansion Slots PCI-Express 6 (x8) PCI-E 3.0 slots (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.) System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 BIOS rescue hot keys USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 Management Software SuperDoctor® III Watch Dog NMI IPMI 1.5 / 2.0 Power Configurations ACPI / APM Power Management CPU Fan auto-off in sleep mode Power-on mode for AC power recovery PC Health Monitoring Voltage Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, 4 Memory Voltages. 5+1 Phase-switching voltage regulator FAN 8x 4-pin fan headers 8x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU thermal trip support I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI LED CPU / System Overheat LED